-
-
-
-
-
Contact us
undefined
High-speed railway
2023-01-12
Classification of Girder Transport Vehicles
The semi-trailer tractor serves as the power source in a truck-trailer combination, towing the trailer to carry out transportation operations.
2023-01-12
Tips for Backing Up a Beam Transporter
Both carrier trucks and bicycles are equipped with rear suspension—meaning there’s an additional suspension system behind the wheels—which can create challenges with approach and departure angles when reversing or turning. Exercise caution when operating such vehicles, especially those with long rear overhangs. It’s important to consider not only the position of the wheels but also the location of all four corners of the vehicle.
2023-01-12
What inspections should be carried out during the load test of a girder transporter?
To ensure the safety and proper operation of the girder transporter, it is necessary to conduct load tests on newly installed equipment prior to its commissioning. Next, we will discuss the specific inspections that should be performed during the load testing of the girder transporter.
2023-01-12
What should you do if a girder transporter catches fire?
If the driver and passengers of a girder transporter detect an unusual odor or see smoke, they must remain vigilant. These could be signs of spontaneous combustion. It is best to pull over to a safe area, promptly exit the cab, and use the fire extinguisher that is always carried in the vehicle to put out the fire.
2023-01-12
What should you do if the girder transporter’s engine temperature is high?
Beam-transport vehicles are prone to overheating during the summer, making timely inspection and maintenance of protective systems crucial. Overheating is more common in older vehicle bodies, which is directly related to the industrial and mining environments in which these vehicles operate. In most cases, it is caused by scale buildup and blockages in the water circulation system or radiator.
2023-01-12
How can the cab temperature of a girder transporter be quickly reduced in summer?
Some aluminum-foil insulation films are also quite practical. Before getting off the beam-transport vehicle, applying an aluminum-foil heat-insulating film to the windows can effectively reflect the sun’s heat. Having a covered parking area would be ideal. Parking under a tree is another good option, but in summer both gum and bird droppings tend to fall off. I’d rather park in an open space where it gets warm, as long as it doesn’t get my beam-transport truck dirty.
2023-01-12
How can beam-transport vehicles avoid accidents at highway ramp entrances?
How can beam-transport vehicles avoid accidents at highway ramp entrances? Before setting out, beam-transport trucks must thoroughly familiarize themselves with the route and adhere to the designated path. During the journey, drivers should remain highly focused, pay close attention to directional signs, have a clear understanding of which ramp to take, and make necessary preparations in advance—such as changing lanes well ahead of time. Under no circumstances should drivers hesitate or stop illegally on the highway. When driving on the expressway, stay fully alert at all times; even the slightest carelessness can quickly put you in danger!
2023-01-12
Proper Use of Beam Transport Vehicles
Why is there such a big difference in performance when the same girder-transporting vehicle is operated by different personnel? If the girder-launching gantry is powered by a diesel engine, always refuel at authorized PetroChina or Sinopec stations—never skimp on fuel costs by using low-quality diesel.
2023-01-12
What causes a sharp increase in fuel consumption for beam-transport vehicles?
What causes a sharp increase in fuel consumption for beam-transport vehicles? Some users have noticed that their vehicles are consuming more fuel than before, with reduced power output as well. Yet they recently had the beam-transport trucks fully serviced, consistently used premium-grade filters, and refueled at authorized gas stations.
2023-01-12
Beam transport vehicles must undergo regular safety inspections.
Do not overlook the rubber components on the girder transporter’s body; conduct regular safety inspections to ensure safe operations. To enhance the quietness and comfort of the girder-launching vehicle, manufacturers are increasingly incorporating rubber parts into their designs. Although our owner’s manual seldom addresses the maintenance of these rubber components, it is still essential to monitor their condition during routine servicing. For door and window seals as well as door bellows, apply a rubber-conditioning spray regularly to restore elasticity, prevent cracking, and extend service life.
Address: No.1, Minghui Road,Mazhai Industrial Park, Erqi District, Zhengzhou, Henan Province
Tel: +86-371-60305013
Email: shenshangda@zzdf.cn baomin@zzdf.cn
What'sapp: 008615515866566
Facebook ID: Zhengzhou New Dafang
Copyright © Zhengzhou New Dafang Heavy Industry Science And Technology Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
